News

Date: June 28, 2013 On June 13, 2013 Keymark Corporation successfully completed our ISO 9001:2008 surveillance audit conducted by BSI.  During the three days our auditor was in Fonda, NY, the auditor spoke with individuals throughout the plant to understand and observe our Quality Management System (QMS) in operation.  Specifically the audit focused on the […]

Date: December 18, 2012 On Saturday, December 15, 2012, U.S. Senator – (D) – Charles (Chuck) Schumer of the State of New York visited Keymark Corporation for a plant tour and a meeting with community leaders.  Senator Schumer discussed with the business leaders topics on International Trade, EPA, Workers Compensation, Veterans Tax Credits, Medicare/Malpractice Insurance, Infrastructure,

Date: September 26, 2012 Keymark Corporation, Fonda, NY, an aluminum extrusion manufacturing and finishing company, announces a milestone achievement in becoming registered to the ISO 9001:2008 Quality Management System standard.  Keymark Corporation has achieved   ISO 9001:2008 status through BSI, an accredited Certification Body that performed two stages of audits against international standards for quality.  We

Date: April 04, 2012 On Monday, March 26, 2011 Keymark completed a corporate wide upgrade of our office productivity software to Microsoft Office Professional Plus 2010.  The roll-out process included numerous training sessions to ensure Keymark employees have the knowledge to efficiently and effectively utilize the software.  This initiative demonstrates our commitment to Keymark’s cultural

Date: February 18, 2012 Keymark Corporation installs new regenerative burners to the aluminum casting unit at it’s Fonda, NY facility.  The more eco-friendly burners consume a fraction of the natural gas as the previous one’s and are more energy efficient as they increase the melting rate cycle.  State of the art PLC controls were simultaneously

Date: February 16, 2012 Keymark recently undertook a major project to upgrade it’s larger paint system with the goal to improve overall paint quality.  A fully automated unloading conveyor was installed on the unracking end of the high performance paint line.  The painted extrusions being unloaded from the 25′ vertical line are now kept totally separated so

Date: September 22, 2011 Keymark Corporation of Florida will be implementing a new minimum order size of 2,000/lbs. per line item effective with orders placed on and after 10/17/11.  The new 2,000/lb. minimum line item order size is only in effect for the new 3,000 ton UBE press installed in 2010 at our FL facility.  The new press

Date: July 27, 2011 Keymark Corporation of Florida just completed upgrading the UBE 3,000 ton press, capable of producing shapes up to 14″ in circle size, with a new Granco Clark billet heating furnace.  The new fully automated gas fired billet furnace is equipped with PLC controls providing unmatched billet heating uniformity and improved thermal efficiency.

Date: May 25, 2011 Keymark Corporation has upgraded it’s Engineering software package to AutoCad 2011 recently.  The new software has been installed in both our NY and FL operations Engineering Departments; thus, allowing our Engineering staff to design and assist you with your most difficult extrusion needs.  Our staff is currently undergoing rigorous training on the software

Date: April 15, 2011 We are pleased to announce that we have upgraded our E-Commerce Site with an option that we are sure will be of great benefit to you.  You can now log into our E-Commerce Site and get the visibility of items you have ordered from us and tell if they are packed and